- PLANTRONICS HUB ANNOYING HOW TO
- PLANTRONICS HUB ANNOYING UPDATE
- PLANTRONICS HUB ANNOYING PRO
- PLANTRONICS HUB ANNOYING SOFTWARE
- PLANTRONICS HUB ANNOYING PC
PLANTRONICS HUB ANNOYING UPDATE
Don’t forget that always you need to get the latest update of the firmware to fix glitches or bugs. Hopefully this helps you to enjoy your Poly Focus 2 headset. Repeat to reactivate the LED flashes purple then blue. Hold both the Mute and Call buttons for more than 4 seconds until the LED flashes purple then red.
PLANTRONICS HUB ANNOYING SOFTWARE
This option is if you can’t download third party software in your computer. This will turn off the sensors and that will allow you to move your head freely without muting the microphone, you will be able to still mute the microphone from the mute key or by swinging the mic boom arm.
PLANTRONICS HUB ANNOYING PRO
Plantronics Hub also works in conjunction with Plantronics Manager Pro to give your IT staff an easy-to-use tool to configure and manage devices across the enterprise.
PLANTRONICS HUB ANNOYING PC
On your computer download the Poly Lens App, depending if PC or MAC, and then: Use Plantronics Hub to provide RCC, as required, and enhance user experience with mute and battery status, easily visible on the taskbar.
PLANTRONICS HUB ANNOYING HOW TO
We have to ways how to do it and will show you how to do any of them.ĭownload and update firmware with the Poly Lens App: So we need to turn off the Wearing Sensors in your headset to avoid those annoying muting/unmuting acts.
The reason this is happening is that the calibration of these sensors is a little bit off, as when you tilt or move your head wearing the headset, the same Focus 2 thinks that you are putting the headset down from your head or putting it up.įor the same reason that you can’t be stiff all day when on a call and need to move with your headset Poly had offered a solution as today that avoids this glitch until they fix this matter with the latest firmware update when available. This does not means that your headset is either broken or defective, is something that will get fixed with the next update of the firmware. If youre listening to loud music on them you are just not going to hear that annoying bloke that seems incapable of a normal volume conversation. The glitch that we are talking today involves these sensors and the calibration of them, this means that maybe you have noticed that if you are in a call and suddenly you tilt your head, your microphone mutes. These sensors are located in the bottom of the ear cups. Today we will explain about a glitch that we discovered on the Focus 2 headset that without touching the headset to mute and unmute the microphone while in a call and we will explain how to fix this issue until the new firmware comes in.Īs you are aware your Poly Focus 2 headset has smart sensors in your earcups that are know as “Wearing Sensors” as well, that allows you to answer a call by simply putting the headset on your head, the same sensors allows you to mute the microphone by taking the headset off and unmute by putting it back on, same as if you are streaming something to play or pause music or a video on your computer. After I finished the call, press the call button in Voyager 5200 UC to end the call - it always failed and need to press the end call button in Teams. On the bright side there are options that helps avoid the bad performance. Plantronics Voyager 5200 UC can't end call in Teams I can tape the call button to open the Teams window, and I can tape the mute button to mute voice during the call. Once set, you will not need to adjust the Slide Switch again, unless you change phones.Poly Focus 2 UC and Poly Focus 2 Office is one of the newest headsets in the market and personally I love mine, however as all the new devices as the same thing as with cars, there are going to be glitches or recalls as its human nature. The most common setting will be “A”, if you find you can’t hear you caller, your caller can’t hear you, or it sounds distorted, continue sliding to the next letter until you find the setting that sounds the best. The gear selector (A), is called Slide Switch and its main purpose is the compatibility of the headset with hundreds of desk phones. Plantronics released recently new firmware for the device, which solved the issue for me. Hopefully it's a software issue that can be fixed with an update, but I'm still waiting for a resolution. Plantronics wireless headsets/MDA switches.Īs you can see in the following diagram, when you pick up the base of the headset/switch depending on the model and turn it, you will find a couple of dials (3,2) these dials are going to be the responsible of the “Master” volume control on the headset (3) and “Master microphone” volume control of the headset (2), the normal setting on this dials should be “3” on both of them, that gives the standard sound quality without being annoying. I contacted Plantronics and they agreed it was a problem and sent me a new device, which does the exact same thing.
Before you decide to return your brand new headset lets go and do a little of “light troubleshooting” on it. A lot of times people get their new wireless headsets and the first thing that they notice is that there is no dial tone or there is echo or the volume is too low, and think that they got a faulty headset.
0 kommentar(er)
